Whirlpool WFC150MLAB repair
30-inch freestanding electric range. Service for this model across Tampa Bay.

- Model
- WFC150MLAB
- Type
- 30-inch freestanding electric range
- Brand
- Whirlpool
About the WFC150MLAB
Thirty inches wide and freestanding, the WFC150MLAB is an electric range also sold as WFC150MLAB0 and WFC150MLAW0. That width fits the standard opening, so owners can repair it without reshaping cabinets.
We begin at the plug and the voltage at the terminal block, because loose lugs cause heat marks and intermittent power. Then we move through surface units and their switches, and on to the oven’s bake and broil elements. A thermometer in the cavity shows whether the control is accurate. Knob and selector switch operation are tried, and every part is checked against the label before it is ordered.
What we check on a WFC150MLAB visit
- Plug, cord and voltage at the terminal block
- Surface unit heating and selector switches
- Bake element continuity and oven sensor accuracy
Key features
- 30-inch electric range
- Freestanding style
- A second ending, LAW0, is also sold
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFC150MLAB questions
What does the 30-inch width mean for repairs?
It means the range fits a standard cutout, so repair keeps the kitchen layout as it is. Width alone does not identify parts, so we match them to the label.
The clock works but the oven will not heat. What next?
A working clock shows the range has power. We test the bake element with a meter, check the oven sensor and look at the wiring from the selector to the element.