Whirlpool WFC340S0AS repair
30-inch coil electric range. Service for this model across Tampa Bay.

- Model
- WFC340S0AS
- Type
- 30-inch coil electric range
- Brand
- Whirlpool
About the WFC340S0AS
Electronic oven controls with a timer, a standard oven cavity and chrome drip bowls are part of the WFC340S0AS, a 30-inch freestanding coil-element electric range. Ranges like this serve a household for years, and we repair when the parts are sound.
A dark display could come from the control, the wiring or the supply, and we test in that order. On the cooktop, a coil that glows unevenly or a scorched drip bowl may point to a loose socket. A bowl sitting crooked can also overheat the socket because chrome reflects heat. Bake and broil elements are tested, the door gasket inspected, and parts matched to the label.
What we check on a WFC340S0AS visit
- Electronic control and timer response, wiring and supply
- Coil element heating and socket wear
- Drip bowl fit, bake and broil elements and door gasket
Key features
- 30-inch freestanding coil-element electric range
- Electronic oven controls with a timer
- Standard oven cavity
- Chrome drip bowls
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFC340S0AS questions
The timer beeps but the oven does not heat. Why?
A beeping timer shows the control has power, but the bake relay or element can still be the cause. We test voltage to the element and measure its resistance.
Do you replace the whole control if the display fails?
Only after testing. A loose connector can mimic a failed board, so we check power and wiring first and show the price before ordering a board.