Whirlpool WFE320M0AS repair
30-inch glass-top electric range. Service for this model across Tampa Bay.

- Model
- WFE320M0AS
- Type
- 30-inch glass-top electric range
- Brand
- Whirlpool
About the WFE320M0AS
A smooth ceramic glass cooktop, a standard-clean oven cavity and a storage drawer below the oven characterize the WFE320M0AS, a 30-inch freestanding electric range. The finish letter varies by version, so the label is confirmed.
Glass changes our approach. Elements sit beneath it, so a burner that will not heat could be the element, the infinite switch or the limiter, and each is tested separately. We also inspect the glass for cracks or deep burn marks, since a damaged top can let spills reach the wiring. Bake element continuity and the storage drawer tracks are examined, and the price is written before work.
What we check on a WFE320M0AS visit
- Radiant element, infinite switch and limiter, tested separately
- Glass surface for cracks or burn marks
- Cooktop indicator light, bake element and drawer tracks
Key features
- 30-inch freestanding electric range
- Smooth ceramic glass cooktop
- Standard-clean oven cavity
- Storage drawer below the oven
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFE320M0AS questions
One glass-top burner does not glow. Is the glass the problem?
Rarely, since the glass is only a surface. We access the element underneath, test it with a meter and check the switch and limiter.
Why does a hot-surface light stay on?
It stays lit while the glass is warm, or when its switch is stuck. We check the switch and the residual heat circuit to see which.