Whirlpool WFE510S0AS repair
30-inch glass-top range with AccuBake. Service for this model across Tampa Bay.

- Model
- WFE510S0AS
- Type
- 30-inch glass-top range with AccuBake
- Brand
- Whirlpool
About the WFE510S0AS
AccuBake temperature management is used by the series this 30-inch freestanding electric range belongs to, and the WFE510S0AS has a glass cooktop with several element sizes. A hidden bake element is offered on equipped versions, so we check which one yours has.
Because a hidden element sits beneath the oven floor, we cannot judge it by glow and measure it instead. The sensor in the cavity drives AccuBake, and one that reads wrong can make the oven overshoot or underheat, so we compare it to a thermometer first. Dual-size element selection, glass condition and control response round out the checks, with the label confirming the version.
What we check on a WFE510S0AS visit
- Radiant element sizes and dual-size selection
- AccuBake sensor reading against a thermometer
- Hidden bake element heating and glass surface condition
Key features
- Freestanding electric range, 30 inches wide
- Glass cooktop with several element sizes
- AccuBake temperature management in this series
- Hidden bake element on equipped versions
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFE510S0AS questions
How can you tell a hidden bake element has failed?
With nothing to see, we measure resistance across its terminals and the voltage reaching it. A reading outside the expected range, or none, shows whether it is the element or the wiring.
One ring on my burner does not heat. Is it the glass?
The inner or outer ring has its own connection or switch contact. We test each ring separately, so only the failed part is replaced.