Whirlpool WFE510S0HB repair
Freestanding electric range. Service for this model across Tampa Bay.

- Model
- WFE510S0HB
- Type
- Freestanding electric range
- Brand
- Whirlpool
About the WFE510S0HB
The WFE510S0HB is a freestanding electric range, listed in versions including WFE510S0HB0, WFE510S0HB1 and WFE510S0HS0. Fuel and style are all we state as fact; everything else is looked for on the range.
If yours still cooks but one part has stopped, repair can be the sensible route. We first work out whether power, cooktop or oven is involved, then test the smallest part that could explain it, such as a switch, an element or a connector, before suggesting anything larger. Terminal block condition, door gasket and oven control response are included. The label tells us the version, and we quote the work in writing.
What we check on a WFE510S0HB visit
- Power at the terminal block
- Cooktop element heat, switch and connector
- Bake and broil element, oven control response and door gasket
Key features
- Electric range
- Freestanding style
- Other versions: WFE510S0HB0, WFE510S0HB1 and WFE510S0HS0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFE510S0HB questions
What small part could explain a dead burner?
The element itself or its switch. Both cost little compared with a range. We test each and replace only the one that fails.
The oven still bakes but the clock is dead. Now what?
The clock may be a separate display or a failing connector. We check the wiring first, and replacing a board is a last step with the price written first.