Whirlpool WFG371LVB repair
Freestanding gas range. Service for this model across Tampa Bay.

- Model
- WFG371LVB
- Type
- Freestanding gas range
- Brand
- Whirlpool
About the WFG371LVB
WFG371LVB, a freestanding gas range, also appears with suffixes such as WFG371LVB0, WFG371LVD1 and WFG371LVQ0 for color or revision. The exact number on your label decides which igniter, gasket or switch fits.
Because the range ends a counter run or sits between cabinets with its gas line behind it, our visit starts at the cooktop and the oven door, where each burner is watched as it ignites and the flame is judged for evenness. Then we shut the oven door and look for a tight seal along the gasket, since a leaky door stretches bake times and browns food unevenly. We also set the knob to bake to confirm the control follows the dial.
What we check on a WFG371LVB visit
- How steadily each burner ignites and holds its flame
- Igniter and gas valve working together with the knob at bake
- Door seal and hinge tension
Key features
- Runs on gas
- Freestanding
- Plate suffixes include WFG371LVB0, WFG371LVD1, WFG371LVQ0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFG371LVB questions
The oven door will not shut fully. Does that change how food cooks?
It does. A tired gasket or weak hinge leaks heat, leaving uneven browning and longer bake times. We inspect both and quote the correction before beginning.
A burner lights and then dies. Why?
Possible reasons include a dirty port, a cap sitting off position, or a weakened flame-sensing part. Cleaning and seating the cap come first, followed by an ignition test if it persists.
Which suffix on my range matters for parts?
All of them. WFG371LVD1 or WFG371LVQ0 could indicate another finish or revision, so we read the full number from your range and match to it.