Whirlpool WFG374LVB repair
Freestanding gas range. Service for this model across Tampa Bay.

- Model
- WFG374LVB
- Type
- Freestanding gas range
- Brand
- Whirlpool
About the WFG374LVB
The WFG374LVB is a freestanding gas range, and its label can also read WFG374LVB0, WFG374LVD0 or WFG374LVQ0. We confirm which one is printed on yours before we plan parts.
A gas range works only when four things cooperate: gas supply, spark, flame and oven control, so we divide the problem along those lines. Surface burners are tested one at a time and then together, because weak flames with several burners on point toward the supply side rather than a single burner. In the oven we measure how much current the igniter draws and time how long the valve takes to open. Parts are ordered once the full label number is confirmed in your kitchen.
What we check on a WFG374LVB visit
- Spark module and electrode at each burner
- Igniter current draw and valve opening time in the oven
- Gas pressure with several burners on, plus the shutoff and connector at the back wall
Key features
- Runs on gas
- Freestanding layout
- Other label versions include WFG374LVB0 and WFG374LVD0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFG374LVB questions
My burners get weak when two are running. What does that suggest?
The gas supply, regulator or shutoff may be limiting flow instead of the burners themselves. We test each burner alone, then together, and inspect the connector before replacing anything on the range.
A burner keeps clicking after it lights. Is that dangerous?
It should not continue, though it is not an emergency by itself. Moisture, a dirty electrode or a sticking switch can keep the spark module running, so we clean and dry the area, then test the switch and module.
Will you repair a stove that is out of warranty?
Yes. Many gas stoves run well past their warranty. If a repair would cost more than the range is worth, we say so, and the written price always comes before work.