Whirlpool WFG500M4HS repair
Freestanding gas range. Service for this model across Tampa Bay.

- Model
- WFG500M4HS
- Type
- Freestanding gas range
- Brand
- Whirlpool
About the WFG500M4HS
WFG500M4HS is a freestanding gas range, listed with one other ending, WFG500M4HS0. A model number this long invites mistakes, since one wrong character can bring the wrong burner base or igniter, so we read the plate ourselves.
Ranges like this sit against a rear wall with the gas line behind, and grease and spills gather around the burner bases as years pass. We therefore begin by cleaning and then watching how each burner fires. The oven goes through a heating cycle while we observe the igniter, the valve and the door. A crooked door or flattened gasket lets heat escape and bake times drift. If your range is old enough that repair no longer makes sense, we say so directly.
What we check on a WFG500M4HS visit
- How each burner fires once the base is clean
- Oven igniter and valve behavior during a full heat-up
- Door alignment, gasket contact and the space around the gas line
Key features
- Gas range
- Freestanding
- Plate version WFG500M4HS0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFG500M4HS questions
Grease has built up around my burners. Does it matter?
It does. Residue can plug the burner ports and foul the electrode, which gives weak or lopsided flames. We clean first, then test ignition to see what remains.
How long does the oven igniter test run?
A few minutes. We watch the glow, measure the current it pulls and see how soon the valve opens. A low reading points to the igniter as the cause.
Does the ending on my plate really matter?
Yes. The WFG500M4HS0 label confirms the exact version, and we match parts to it. We check the plate on the appliance before ordering, even when the base number looks familiar.