Whirlpool WFG510S0HB repair
Free-standing gas range. Service for this model across Tampa Bay.

- Model
- WFG510S0HB
- Type
- Free-standing gas range
- Brand
- Whirlpool
About the WFG510S0HB
Here is what a technician should know about the Whirlpool WFG510S0HB: it is a free-standing gas range, with the gas line at the back wall, and its number also appears as WFG510S0HB0, WFG510S0HB1 and WFG510S0HS0.
The service call that starts with a boil-over is a classic. Liquid reaches the burner base, the electrode gets wet, and the burner clicks without lighting or will not stay on. We dry and clean the head, test the spark switch, and check the flame at its lowest setting. Next we move to the oven and follow the igniter and valve through a full warm-up. The label is read before any part is ordered.
What we check on a WFG510S0HB visit
- Burner lighting after a boil-over
- Oven igniter glow and gas valve response
- Flame at the low setting, plus the gas connector and shutoff behind the range
Key features
- Gas fuel
- Free-standing
- Other labels: WFG510S0HB1, WFG510S0HS0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFG510S0HB questions
Soup boiled over and a burner will not light. Is it ruined?
Probably not. Liquid in the burner base or on the electrode blocks the spark. We dry and clean the head, test the electrode and switch, and replace parts only if they test bad.
What does a flame that dies at low tell you?
A dirty port, a misaligned cap or a burner valve problem can all cause that. We examine the cap and port first because cleaning costs the least.
What if I smell gas from the range?
Leave the home, avoid switches and phones inside, and call your gas utility or 911 from outside. Once the area is cleared as safe, we can inspect the connector and burner valves.