Whirlpool WFG515S0MB repair
Free-standing gas range. Service for this model across Tampa Bay.

- Model
- WFG515S0MB
- Type
- Free-standing gas range
- Brand
- Whirlpool
About the WFG515S0MB
WFG515S0MB is a free-standing gas range in a family that includes WFG515S0MB1, WFG515S0MS0 and WFG515S0MS1. Each version can bring slightly different small parts.
Ranges get moved more than owners expect, for deep cleaning or new floors, and every move gives the gas connector, the level or the anti-tip bracket a chance to end up wrong. On our visit we check how the range sits, whether the connector is relaxed and secure, and how burners and oven respond in that position. A range out of level explains many strange flame problems. Before a part is ordered, the label is read and a written price is given.
What we check on a WFG515S0MB visit
- Stability and level of the range on its feet
- Surface burner flame steadiness
- Oven igniter condition and how long the gas valve takes to open
Key features
- Gas fuel
- Free-standing
- Label versions: WFG515S0MB1, WFG515S0MS0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWFG515S0MB questions
Is range position part of your check?
Yes. A range that leans, or was pulled out, can strain the connector and affect the oven. Level, connector and bracket are part of every visit.
The flame looks uneven along one side of a burner. Why?
Debris in some ports, or a cap that is not seated, can do that. We clean the burner and recheck the flame before testing the spark and valve.
How does the oven begin heating on this range?
The igniter warms and pulls current until the gas valve opens. If it is weak, the valve opens slowly or not at all. We measure the current and replace the igniter only if it reads low.