Whirlpool WGE33001 repair
Freestanding electric range. Service for this model across Tampa Bay.

- Model
- WGE33001
- Type
- Freestanding electric range
- Brand
- Whirlpool
About the WGE33001
Found in apartments, duplexes and single-family homes, the WGE33001 is a freestanding electric range. A few parts account for most calls: surface elements, their receptacles, selector switches and the oven elements.
On arrival we watch what the cooking surface does. A coil that will not heat might need replacing, but a burnt receptacle or a switch that has lost contact gives the same result, and replacing the wrong part wastes money. In the oven we read both elements with a meter and compare cavity temperature to the dial. A range that has cooked for years deserves a look at wiring and terminals before parts are recommended, and the label tells us which revision you have.
What we check on a WGE33001 visit
- Burner coil that sparks, pits or will not stay seated
- Selector switch that feels loose or leaves the element on
- Oven that never reaches the dial setting, and broil element glow
Key features
- Electric range
- Freestanding
- Standard 240-volt supply
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWGE33001 questions
Why does one coil stay on high?
A selector switch that has failed internally can keep the burner powered whatever the knob says. With the breaker off we test the switch and its leads and change only the switch if it proves bad.
Is a pitted coil dangerous?
A pitted or blistered coil can arc in the receptacle and damage terminals. We recommend replacing the coil and inspecting the receptacle, since a burnt socket follows when a worn coil stays in service.
How do you know which element fits this range?
Coil size and receptacle style can differ between revisions. We check the label on the range before ordering, so the correct part arrives on the first trip.