Whirlpool WGG755S0BE repair
30-inch freestanding gas range. Service for this model across Tampa Bay.

- Model
- WGG755S0BE
- Type
- 30-inch freestanding gas range
- Brand
- Whirlpool
About the WGG755S0BE
At 30 inches, the WGG755S0BE is a freestanding gas range sized for standard cutouts. It stands on the floor between cabinets, with the gas shutoff and power cord behind, so a service call starts with moving it out safely and checking connections.
The ignition path gets our first look: spark module, burner caps and bake igniter. If the cooktop lights but the oven does not, we measure igniter current and inspect the oven burner and safety valve. A lifted or yellow flame points to a dirty port or an air-mixture problem rather than the control. Endings such as BE00, BH01 or BE07 appear on the label with the main number, so we read the model and serial label before ordering.
What we check on a WGG755S0BE visit
- Burner ignition that keeps clicking after the flame appears
- Oven igniter slow to open the gas valve
- Yellow or lifting flames, and oven temperature against the display
Key features
- 30 inches wide
- Gas range
- Freestanding
- Other codes: WGG755S0BE00, WGG755S0BH01, WGG755S0BE07
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWGG755S0BE questions
My oven will not light but the burners do. What next?
The oven has its own igniter and safety valve. We test igniter current first, since a weak one is a leading reason for no flame, then check the valve and sensor.
What causes yellow flames on a gas range?
Clogged burner ports, a misplaced cap or poor air mixture. We clean and realign the burner and adjust the air shutter if needed.
Does the 30-inch width matter for repair?
Width tells us the cabinet cutout and which burner and door parts apply. We still confirm the full label so the right revision is ordered for your range.