Whirlpool WHE383311 repair
30-inch electric range cooktop. Service for this model across Tampa Bay.

- Model
- WHE383311
- Type
- 30-inch electric range cooktop
- Brand
- Whirlpool
About the WHE383311
Listed as a 30-inch electric range cooktop, the WHE383311 is set into a counter cutout with no oven underneath. That wording matters for service: the work concerns surface elements, their switches and the wiring below, not baking.
First we confirm from the label whether yours is a drop-in surface unit or part of a complete range, since the parts differ. Then each surface element gets a continuity test, the terminals are inspected for scorching and the controlling switch is checked. A light that stays on after the burner is off sends us to the switch or the hot-surface indicator circuit. If the glass or frame is damaged beyond a sensible repair, we say so plainly.
What we check on a WHE383311 visit
- Radiant or coil surface unit that heats only in part
- Burner switch that no longer holds a steady setting
- Indicator light that stays on, and glass or trim damage affecting the fit
Key features
- 30 inches wide
- Electric
- Listed as an electric range cooktop
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWHE383311 questions
One burner never heats. What is the cause?
The element, its terminal block or the burner switch may have failed. We measure continuity at the element and voltage at the switch, then replace only the part that fails the test.
Does a cooktop have an oven I can have repaired?
If yours is a cooktop only, there is no oven. We check the label to learn whether it belongs to a full range and tell you which parts apply before ordering.
Why does the hot indicator stay lit?
Residual heat, a stuck switch or a wiring problem at the indicator can do it. We check the switch contacts and indicator circuit to find which.