Whirlpool WHP54803 repair
Freestanding electric range. Service for this model across Tampa Bay.

- Model
- WHP54803
- Type
- Freestanding electric range
- Brand
- Whirlpool
About the WHP54803
The WHP54803 is a freestanding electric range on a heavy-gauge cord and a dedicated circuit. A visit therefore includes the cord, terminal block and outlet along with the cooking parts.
One thing we watch for is the connection at the back. A loose lug can burn and drop one leg of the supply, which leaves the oven weak while the clock and light still work. Once the supply is confirmed, we test elements, sensors and switches in turn. A burner pair that heats unevenly between left and right sends us to the receptacles. Hinges and handles on older ranges wear, and we adjust or replace them during the visit when needed. The model and serial label tells us which part to order.
What we check on a WHP54803 visit
- Oven light and clock working but no heat
- Burners that heat unevenly between left and right
- Door hinge or handle wear, and burned wire ends where the cord meets the terminal block
Key features
- Electric range
- Freestanding
- Surface elements and oven both use 240-volt power
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeWHP54803 questions
My oven light comes on but nothing heats. Why?
Light and clock use a different path from the heating elements. A burned connection at the terminal block, or one dead supply leg, is a frequent cause, so we measure the supply first.
Can a burned cord connection be repaired?
Yes. We replace the damaged terminal ends and the cord if needed, then confirm both legs read correctly before testing the oven and burners.
What does an uneven burner pair tell you?
If one side of the cooktop heats and the other does not, we look at that side's receptacle and switch first, since the elements are simple parts that rarely fail alone.