Whirlpool YGFE461LVB repair
30-inch freestanding electric range. Service for this model across Tampa Bay.

- Model
- YGFE461LVB
- Type
- 30-inch freestanding electric range
- Brand
- Whirlpool
About the YGFE461LVB
The YGFE461LVB is an electric freestanding range, 30 inches wide, which fits the standard kitchen opening and plugs into a 240-volt outlet at the rear. We see it in homes and apartments where the unit changed hands with the property and nobody remembers its last service.
We begin with the elements: the oven bake and broil coils and each surface unit. A visible split or a pitted terminal tells us a lot before any meter touches it. If the oven stays cool while the display counts normally, supply, element and relay are checked in that order. Color endings such as LVB0, LVQ0 or LVS1 belong to the full number, so the model and serial label is copied before any order.
What we check on a YGFE461LVB visit
- Oven that stays cool while the display counts normally
- Surface element that sparks or pits at the terminal
- Bake element with a visible split, and a control that beeps without accepting a setting
Key features
- 30 inches wide
- Electric range
- Freestanding
- Other codes: YGFE461LVB0, YGFE461LVQ0, YGFE461LVS1
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeYGFE461LVB questions
The display works but the oven is cold. Why?
A display only shows that the control has power. The bake element, the relay feeding it or the supply to the terminal block may be the cause, so we test them in order.
Why does a surface coil spark where it plugs in?
A worn terminal, or a coil that no longer seats firmly. When the terminal is burned, we replace the receptacle and coil together.
Does the width affect which parts I need?
It tells us the cutout and door size, but the revision on the label decides control and element parts, so we confirm that before ordering.