Whirlpool YWFE510S0AB repair
30-inch freestanding electric range. Service for this model across Tampa Bay.

- Model
- YWFE510S0AB
- Type
- 30-inch freestanding electric range
- Brand
- Whirlpool
About the YWFE510S0AB
YWFE510S0AB is listed as a 30-inch freestanding electric range, the easiest kind to line up with a standard opening. In condos and townhomes it may be the original range, now with years of daily cooking behind it.
A repair starts at the rear, where the power cord meets the terminal block. We look for discoloration, then test the elements and the oven sensor. If the keypad is slow, we check for moisture or grease in the control area before replacing a board, since cleaning and a new connector can restore normal response. Endings YWFE510S0AB0, YWFE510S0AS0 and YWFE510S0AW0 share the base number, so we read your label before ordering parts.
What we check on a YWFE510S0AB visit
- Burner that will not heat or heats on one setting only
- Bake element current and oven sensor reading
- Keypad or display response, plus rear panel wiring at the cord
Key features
- 30-inch width
- Electric range
- Freestanding
- Also found as YWFE510S0AB0 and YWFE510S0AS0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeYWFE510S0AB questions
What does a 30-inch freestanding range need for installation?
A standard 30-inch opening, a 240-volt outlet and a few inches behind for the cord. If we move it for repair, we check it is level and the anti-tip bracket is engaged afterward.
Why is my keypad slow to respond?
Grease, moisture or a loose ribbon connector behind the panel can slow it down. We open the panel, inspect the connector and test the control before suggesting a replacement.
Do you replace the oven sensor?
Yes, when testing shows its reading has drifted from the resistance expected at room temperature. We compare real oven heat with a thermometer first to be sure it is the cause.