Whirlpool YWFES3330RB repair
Free-standing electric range. Service for this model across Tampa Bay.

- Model
- YWFES3330RB
- Type
- Free-standing electric range
- Brand
- Whirlpool
About the YWFES3330RB
YWFES3330RB is a free-standing electric range of the plain, practical kind found in rentals and starter homes around Tampa Bay, running from a 240-volt receptacle on the wall.
Knob-controlled switches and plug-in elements make many repairs on this range quick. We start by seeing which parts respond: all four burners, both oven elements, the light and the timer. Whatever does not respond points us at one switch, one element or one connection, and we test that part before replacing it. Endings such as YWFES3330RB2, YWFES3330RW0 and YWFES3330RZ0 are sold under the same number, so reading the plate lets us match the part to your range.
What we check on a YWFES3330RB visit
- Coil or surface element that no longer glows evenly
- Oven cooking unevenly from one rack to the next
- Broil element dark while bake works, plus knobs that turn without changing burner heat
Key features
- Free-standing electric range
- Also sold as YWFES3330RB2, YWFES3330RW0, YWFES3330RZ0
- Uses a 240-volt household circuit
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool range codes
Codes listed for Whirlpool ranges. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool range models
RangeWEG515S0FV30-inch gas slide-in range
RangeWEG515S0LBGas slide-in range
RangeWEG750H0HBGas slide-in range
RangeWEG995H0FSlide-in gas range
RangeWEGA25H0HNGas slide-in range
RangeWFC110M0AW30-inch coil electric range
RangeWFC130M0AWWhite coil electric range, manual-clean
RangeWFC150M0EBFreestanding electric rangeYWFES3330RB questions
Can a single burner element be replaced here?
Yes. Each surface element comes out separately, and its receptacle is swapped too when the terminals show burns. We test first so you pay for the part that failed and nothing else.
Bake works but broil stays cold. Which part failed?
Bake and broil use separate elements, so the broil element, its wiring or the selector switch is suspect. We meter them one after another and replace the one that fails.
Where is the complete model number?
Look for the plate on the front frame by the oven door or inside the bottom drawer opening. Send us the label and we confirm the ending before ordering parts.