(813) 565-3059 Book a Repair
Whirlpool washer error code

Whirlpool Washer Code PF: Power Failure During the Cycle

PF means a Whirlpool washer lost power while running. The washer is generally fine, and you can resume or restart the cycle depending on your model.

Normal status, not a failureChecked November 2026

What does Whirlpool washer code PF mean?

PF means the washer lost power while it was running. It appears on Whirlpool front-load washers from the Duet and WFW family and on top-load HE washers in the Cabrio and WTW series. On some front-load models you can press Start to finish the cycle, while others need Cancel and a restart from the beginning. On a top-load washer, touch and hold Start to continue the wash, or press Power to clear the display. A storm, a tripped breaker or an unplugged cord is the common cause.

PF at a glance

Code
PF
Appliance
Whirlpool washer
Applies to
Whirlpool Duet, WFW, Cabrio and WTW washers
Type
Normal status, not a failure
Can you clear it yourself?
Yes, it is a normal message or setting
Most likely cause
Power outage or brownout during the cycle

What you may notice with PF

  • PF on the display after the lights flicker or the power returns
  • A cycle that stopped partway through
  • Water still sitting in the tub
  • A plug that sits loose in the outlet

How the washer detects PF

The control keeps track of where the washer is in a cycle. If the power goes away for any reason, the washer stops at once, and the control loses its place in the program. When power returns, the washer checks its state and shows PF to tell you the cycle was cut short.

What happens next depends on the model. Some front-load washers can pick up where they stopped when you press Start. Others need Cancel and a fresh start from the beginning. Top-load washers let you touch and hold Start to continue the wash, or press Power to clear the display. The code is a report, not a warning about a failed part. Only when PF repeats with steady household power does the cord, the plug or the control come into question.

Why PF appears

  • Power outage or brownout during the cycle
  • Tripped breaker or GFCI outlet
  • Loose plug or power cord
  • Frequent PF with steady household power points to the control or power supply

Can you keep using the washer with PF?

Yes, the washer can run again once the power is back, and PF itself does not mean damage. Resume or restart the cycle as your model allows and confirm it completes. If the tub holds water, let it drain before opening the door. If PF keeps appearing without a power outage, stop and have the outlet, cord and control tested.

What you can safely check

  1. If the washer is full of water, do not reach in until the basket has stopped and the power is back.
  2. Check whether the lights in the room and other outlets still work.
  3. On a front-load, try Start to resume, and if it will not, press Cancel and begin again.
  4. On a top-load, touch and hold Start to restart, or press Power to clear.
  5. Make sure the plug is fully seated and the breaker is on, and call us if PF repeats with steady power.

What our technician does for PF

  • Check the outlet and the cord
  • Test the power supply to the control
  • Look for a control that drops out on its own

How to keep PF from coming back

  • Push the plug fully into a dedicated grounded outlet
  • Use a surge protector suited to large appliances where storms and power dips are common
  • Reset a tripped breaker or GFCI only after checking that nothing else is wrong
  • Avoid running long cycles during an approaching storm if you can wait

Technical reference

Code
PF
Appliance
Whirlpool washer
Control family
Whirlpool Duet, WFW, Cabrio and WTW washers
Checked
November 2026

Code meanings come from the maker’s documentation and our own repair work; we do not reprint the maker’s document. Confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

PF questions

Does PF mean my washer is damaged?

No. It records that power was lost during a cycle, and the washer is generally fine. Resume or restart the cycle and check that it completes normally.

Why must I restart from the beginning on some models?

Different models handle an interrupted cycle differently. Some can resume where they stopped, while others cancel and require a fresh start. Your manual explains which type you own.

What if PF keeps coming back?

Check the outlet and breaker first. If the house power is steady and PF returns, the cord, plug or control may be dropping out, and the supply can be tested.

Do I lose my load when PF appears?

No, the clothes stay in the drum. On some models the washer resumes, and on others you cancel and start over. Because water may remain in the tub, let it drain before you open the door.

Is PF the same as Int?

No. PF means power was lost during the cycle. Int means the cycle was paused or canceled and the washer is winding down. The two codes look similar but come from different events, so the fix and the checks differ.

Something else going on with your washer?

We trace the cause in your home first and write the price down before any part is swapped.

Call Book a Repair
Call (813) 565-3059 Book a Repair