Whirlpool WDT730HAMZ repair
24-inch top-control dishwasher, third rack. Service for this model across Tampa Bay.

- Model
- WDT730HAMZ
- Type
- 24-inch top-control dishwasher, third rack
- Brand
- Whirlpool
About the WDT730HAMZ
Controls hidden along the top of the door, a third rack, boost cycle options and a fingerprint-resistant stainless exterior set apart the WDT730HAMZ, a 24-inch dishwasher with a stainless tub.
When it does not respond, we test the control panel on the top edge of the door together with the latch and switch. The third rack gets inspected for binding rails and for loads that block a spray arm, which leaves dishes unclean. Boost cycles ask more of the fill valve and the heating path, so both are measured. Moisture or a worn connection at the top edge is looked for as well, and the label is read in full before ordering.
What we check on a WDT730HAMZ visit
- Top control panel and cycle start, with latch and switch
- Third rack rails and spray coverage
- Boost cycle heating and fill, drain pump and filter area
Key features
- 24-inch width, controls hidden on the door top
- Third rack above the main racks
- Boost cycle options
- Stainless tub and fingerprint-resistant exterior
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dishwasher codes
Codes listed for Whirlpool dishwashers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dishwasher models
DishwasherDU810SWPQ24-inch built-in push-button dishwasher
DishwasherDU850SWPQ24-inch undercounter push-control dishwasher
DishwasherWDF110PABFront-control undercounter dishwasher
DishwasherWDF310PAABBlack 24-inch front-control dishwasher
DishwasherWDF331PAHBBlack front-control dishwasher, heat dry
DishwasherWDF510PAYWWhite 24-inch built-in dishwasher
DishwasherWDF518SAAB18-inch undercounter dishwasher
DishwasherWDF518SAHM24-inch stainless dishwasher with soil sensorWDT730HAMZ questions
The controls on my WDT730HAMZ do not respond. What gets tested?
The top control panel, the door latch and switch, and the power supply. Because the controls are on the top edge, we also look for moisture or a worn connection there.
What does the boost option mean for service?
It is a harder wash, so it puts more demand on heating and water fill. We test both when it does not finish the job.