Whirlpool 1CWGD5700VW repair
29-inch gas dryer. Service for this model across Tampa Bay.

- Model
- 1CWGD5700VW
- Type
- 29-inch gas dryer
- Brand
- Whirlpool
About the 1CWGD5700VW
A gas dryer wants a 120-volt outlet for its motor and controls plus a gas line to the burner. The Whirlpool 1CWGD5700VW is a 29-inch gas model, also sold as 1CWGD5700VW0 and 1CWGD5700VW2, usually with a vent to the outside.
When the drum turns but gives no heat, we check the igniter, the gas valve coils and the flame sensing parts, and confirm gas at the valve. Weak heat or long drying times send us to the vent run and lint in the blower housing, which doubles as a safety check. Noise or a drum that will not turn leads to the belt, rollers and idler pulley. This is an older style of dryer, and we say plainly when repair is not worth it.
What we check on a 1CWGD5700VW visit
- Igniter and gas valve coils when there is no heat
- Burner flame and gas supply shutoff
- Lint in the vent run and blower, plus drum belt, rollers and idler pulley
Key features
- 29-inch width
- Gas dryer
- Also sold as 1CWGD5700VW0 and 1CWGD5700VW2
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dryer codes
Codes listed for Whirlpool dryers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dryer models
1CWGD5700VW questions
My 1CWGD5700VW turns but does not heat. What do you check?
The igniter, gas valve coils and sensing parts, and whether gas reaches the valve. We also check the vent, because restricted airflow can keep a burner from staying lit.
Why does it take two cycles to dry a load?
Restricted airflow from lint in the vent or blower is the first suspect. We check the vent run, clean what we can reach, then test the burner and thermostat.