Whirlpool 7MWGD8800AW repair
27-inch gas dryer. Service for this model across Tampa Bay.

- Model
- 7MWGD8800AW
- Type
- 27-inch gas dryer
- Brand
- Whirlpool
About the 7MWGD8800AW
The 7MWGD8800AW is a 27-inch gas-fired Whirlpool dryer. Labels for this number can carry a revision suffix, either 7MWGD8800AW0 or 7MWGD8800AW1, and that suffix decides which replacement parts are a match.
On a visit we watch the burner through a complete start-up: igniter glow, gas valve opening, and a flame that lasts to the end of the cycle. When the drum turns but the air stays cool, that sequence narrows the cause fast. Next comes the vent, because a crushed or lint-packed duct makes the burner quit early. The gas shutoff and flex line fitting get a look before the dryer slides back into place.
What we check on a 7MWGD8800AW visit
- Igniter glow and gas valve opening during a full start-up
- Shutoff valve and flex line connection at the back
- Vent length and lint load, plus drum roller and belt sounds
Key features
- 27-inch width
- Gas-fired heating
- Also sold as 7MWGD8800AW0 and 7MWGD8800AW1
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dryer codes
Codes listed for Whirlpool dryers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dryer models
7MWGD8800AW questions
Why does my gas dryer tumble but never get warm?
Three things get tested in order: whether the igniter glows, whether the valve coil opens the gas, and whether the shutoff behind the dryer is fully open. Parts are replaced only after a test shows one has failed.
Does the digit at the end of 7MWGD8800AW1 change anything?
It marks a revision, and some parts differ from one revision to the next. The full number on the label is matched before any part is ordered.