Whirlpool WGD4105SW repair
Dial-control gas dryer, white. Service for this model across Tampa Bay.

- Model
- WGD4105SW
- Type
- Dial-control gas dryer, white
- Brand
- Whirlpool
About the WGD4105SW
Mechanical controls and a simple dial set the WGD4105SW apart as a white gas Whirlpool dryer with timed drying cycles. There is no electronic board in it, which keeps some repairs direct and also puts extra work on the timer and its contacts.
A no-heat call starts at the burner. The igniter glow is watched, the gas valve is listened for, and the flame is observed to see if it holds. A weakened igniter or a tired coil can keep a flame from starting. If the drum will not run at all, the timer, door switch and thermal fuse are tested. The gas shutoff and connector get a leak check, and the vent run is cleared of lint.
What we check on a WGD4105SW visit
- Igniter glow, gas valve coil and flame hold
- Timer, dial contact, door switch and thermal fuse for a dead drum
- Gas shutoff, connector, flame sensor and vent lint
Key features
- Gas vented dryer with mechanical controls
- Timed drying cycles
- Simple dial operation
- White finish
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dryer codes
Codes listed for Whirlpool dryers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dryer models
WGD4105SW questions
How does repair differ on a dial-control gas dryer?
A mechanical timer stands in for a board, so the timer contacts and dial position are tested along with the burner parts. Simpler electronics mean simpler tests.
Is a gas connection check part of the visit?
Yes. The flex connector and shutoff valve are inspected on every gas dryer visit, and anything that needs correcting is explained before the dryer is put back in use.