Whirlpool WGD4720RW repair
Gas dryer, white. Service for this model across Tampa Bay.

- Model
- WGD4720RW
- Type
- Gas dryer, white
- Years
- Current model
- Brand
- Whirlpool
About the WGD4720RW
A current Whirlpool model, the WGD4720RW is a white gas dryer with automatic and timed cycles and a wrinkle shield option. Its listed revision is WGD4720RW0, and it needs a gas connection plus an outdoor vent.
When loads come out damp, two causes lead the list. One is the burner, so we watch igniter, valve coils and flame through a full start-up. The other is airflow, because a restricted vent shortens the burn and the flame cuts out early. On an automatic cycle a third cause joins them: sensor strips coated with softener end the cycle too soon. If the drum will not start, the door switch and thermal fuse are tested.
What we check on a WGD4720RW visit
- Igniter glow, valve opening and flame stability
- Vent restriction and thermal cut-outs
- Sensor strips on the automatic cycle, door switch and drum belt
Key features
- Gas vented dryer
- Automatic and timed cycles
- Wrinkle shield option
- White finish
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dryer codes
Codes listed for Whirlpool dryers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dryer models
WGD4720RW questions
Why does my gas dryer stop before clothes are dry?
A flame that drops out, a restricted vent tripping the cut-outs, or softener-coated sensor strips. All three are checked before any part is replaced.
Can the gas dryer be repaired without moving the gas line?
In many cases, yes. Work is done from the front and sides, and the connector is inspected without altering the line. If the dryer has to come out, the connection is checked again afterward.