Whirlpool WGD4900XW repair
29-inch vented gas dryer. Service for this model across Tampa Bay.

- Model
- WGD4900XW
- Type
- 29-inch vented gas dryer
- Brand
- Whirlpool
About the WGD4900XW
The WGD4900XW is a 29-inch Whirlpool gas dryer sold with several endings, including WGD4900XW0, WGD4900XW1 and WGD4900XW3. More than one revision has been through production, so the exact label counts for more than the base number.
That label is found behind the door and written down before belts, switches or valve parts are matched. On the dryer itself, the first question is whether the burner shuts off early. Heat building in the cabinet signals exhaust that is not leaving, and a long duct run to the roof or an outside wall can hide a crushed section. The lower cabinet is opened to clear the lint gathered around the burner and blower.
What we check on a WGD4900XW visit
- Whether the burner shuts off early, and cabinet overheating
- Exhaust duct length, crushed sections and gas valve coil continuity
- Lint in the lower cabinet, drum glides and rollers
Key features
- 29-inch width
- Gas supply required
- Label may end in WGD4900XW0, XW1 or XW3
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dryer codes
Codes listed for Whirlpool dryers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dryer models
WGD4900XW questions
Why does my dryer shut off before the cycle is done?
Heat trapped by a weak vent trips the thermostats and the burner stops, though the drum may keep turning. Airflow is checked first, then the thermostats and gas valve coils.
Is lint inside the cabinet dangerous?
Lint near a gas burner is a fire concern as well as an airflow problem. Cleaning the burner area and blower housing is part of servicing this dryer.