(813) 565-3059 Book a Repair
Model library · Whirlpool dryer

Whirlpool WGD5500XW repair

27-inch gas dryer. Service for this model across Tampa Bay.

Whirlpool dryer repair in Tampa Bay
Model
WGD5500XW
Type
27-inch gas dryer
Brand
Whirlpool

About the WGD5500XW

Whirlpool made the WGD5500XW as a 27-inch gas dryer, and it also appears as WGD5500XW2. The ending is why the full label gets read before any part is ordered.

At 27 inches it suits a standard laundry closet or a hall alcove shared with a washer, where space is tight. The unit is slid out first so the gas connector, the duct clamp and the wall vent outlet can be seen. A burner clicking on and off rapidly tells us the machine is overheating because air cannot leave, so airflow is measured, followed by tests on the cut-off and thermostat. Drum rollers are checked for flat spots, and lint around the burner area is cleaned.

What we check on a WGD5500XW visit

  • Rapid burner cycling, thermostat and thermal cut-off
  • Gas connector, duct clamp and vent connection at the wall
  • Drum rollers for flat spots and lint inside the cabinet

Key features

  • 27-inch width
  • Gas heat
  • Revision ending 2 also listed

The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

WGD5500XW questions

Why does the burner flash on and off?

Short cycling points to overheating from a blocked vent. The thermostat opens, the burner stops, then it relights. The duct is cleared and the thermostat and cut-off tested.

Can you work on a dryer in a tight closet?

Yes. A 27-inch unit can generally be pulled forward far enough to reach the back panel. Gas and vent are disconnected carefully, then reconnected and tested at the end.

Call Book a Repair
Call (813) 565-3059 Book a Repair