Whirlpool WGD5600XW repair
27-inch gas dryer. Service for this model across Tampa Bay.

- Model
- WGD5600XW
- Type
- 27-inch gas dryer
- Brand
- Whirlpool
About the WGD5600XW
Three revisions, WGD5600XW0, WGD5600XW1 and WGD5600XW2, are listed for the WGD5600XW, a 27-inch Whirlpool gas dryer. Parts do not always swap between revisions, so the first question concerns your label.
When seams in jeans or towels stay wet after a full cycle, the dryer is making heat without moving enough air. We look at the vent for elbows, sagging flex duct and lint, then at the blower wheel. With airflow fine, the burner is next, and the way it lights is watched. A delay of several seconds before ignition suggests a worn igniter. An open thermal fuse is cheap, but it is a sign of overheating, so the cause is found before a new one goes in.
What we check on a WGD5600XW visit
- Vent elbows, sagging flex duct, lint and blower wheel
- Burner ignition delay and igniter wear
- Thermal fuse continuity with the cause of overheating, plus drum roller wear
Key features
- 27-inch cabinet
- Gas-fired
- Three versions share one base number
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dryer codes
Codes listed for Whirlpool dryers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dryer models
WGD5600XW questions
Why are the seams of my towels still damp?
Seams hold water longest, so they reveal weak airflow first. The vent is checked for lint and elbows, the blower housing cleaned, and the burner confirmed to stay lit all cycle.
Is a blown thermal fuse the whole problem?
Rarely. Fuses open when heat builds from restricted air or a stuck thermostat. That cause is corrected, or the new fuse could blow again.