Whirlpool WGD5800BC repair
27-inch gas dryer. Service for this model across Tampa Bay.

- Model
- WGD5800BC
- Type
- 27-inch gas dryer
- Brand
- Whirlpool
About the WGD5800BC
The WGD5800BC is a Whirlpool dryer that burns gas, in a 27-inch cabinet. Letters at the end carry meaning here: WGD5800BC0 and WGD5800BW0 both appear for the family, and may differ in color.
Heat that comes and goes means the burner or a thermostat is cycling for a reason. A full cycle is watched with the cabinet open to see when the flame drops, and that gets traced to airflow or to a part that opens when hot. The lint filter and duct are inspected first, since they cost nothing to correct. A worn belt or idler can add noise and slow the drum, and the door switch is tested as well.
What we check on a WGD5800BC visit
- Flame behavior across a full cycle, igniter and valve operation
- Lint filter and duct
- Belt, idler and door switch
Key features
- 27-inch cabinet
- Gas dryer
- Sibling WGD5800BW0 also in circulation
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dryer codes
Codes listed for Whirlpool dryers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dryer models
WGD5800BC questions
Why does my dryer heat for a while, then cool?
Airflow or a thermostat. As the vent restricts, cabinet temperature climbs and the burner is switched off. The vent is cleared and the thermostats tested.
Does BC versus BW matter?
The letters after the model digits mark finish or revision. Since some parts differ, the full number printed on the label is used.