Whirlpool WGD5810BW repair
27-inch gas dryer. Service for this model across Tampa Bay.

- Model
- WGD5810BW
- Type
- 27-inch gas dryer
- Brand
- Whirlpool
About the WGD5810BW
Some labels read WGD5810BW and some add a zero as WGD5810BW0, so the number is copied exactly as printed before a part is looked up. It is a 27-inch Whirlpool gas dryer.
Dryers this size get pushed back against the wall, and over the years the vent can be dragged loose or crushed. For a long-drying complaint, we pull the unit forward and put a hand on the duct connection first. A duct that has slipped off the wall collar blows lint and moist air into the room while the dryer works for nothing. After the vent come the burner sequence, the belt and the rollers. A glowing igniter with no flame points to the gas valve coils.
What we check on a WGD5810BW visit
- Duct connection at the wall collar and lint in the run
- Igniter glow without flame, then valve coils
- Belt, drum rollers and the rear panel gas fitting
Key features
- 27-inch cabinet
- Gas dryer
- Listed as WGD5810BW and WGD5810BW0
The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.
Whirlpool dryer codes
Codes listed for Whirlpool dryers. Which ones a unit can show depends on its control board, so we confirm by the full model number.
Other Whirlpool dryer models
WGD5810BW questions
My laundry room feels humid whenever the dryer runs. Why?
The exhaust may have slipped off the wall collar, or the duct may leak. The connection is re-seated and sealed, and lint cleared from the run.
Should my label say WGD5810BW or WGD5810BW0?
Either can appear. The complete number is read and parts matched to it, so a missing zero does not delay the order.