(813) 565-3059 Book a Repair
Model library · Whirlpool dryer

Whirlpool YWED94HEXL repair

27-inch electric dryer. Service for this model across Tampa Bay.

Whirlpool dryer repair in Tampa Bay
Model
YWED94HEXL
Type
27-inch electric dryer
Brand
Whirlpool

About the YWED94HEXL

The Whirlpool YWED94HEXL is a 27-inch electric dryer; its number also appears as YWED94HEXL0, YWED94HEXL1 and YWED94HEXL2.

If the breaker trips the moment heat comes on, a grounded heating element is the main suspect. Power is switched off, the element is tested to the frame with a meter, and the coils are inspected for burn marks or sagging. Wiring, the cord and the terminal block get checked as well, since a damaged cord can ground out the same way. A dryer breaker should not be reset again and again, and humid garage air can corrode terminals.

What we check on a YWED94HEXL visit

  • Element to frame with a meter for a grounded or open element
  • Terminal block, cord and wiring after breaker trips
  • Thermostats, thermal fuse and vent restriction

Key features

  • 27-inch width
  • Electric
  • Endings YWED94HEXL0, YWED94HEXL1 and YWED94HEXL2

The model number is on the data label: inside the door frame, on the drawer edge or behind the kick plate. We are an independent repair company, not affiliated with Whirlpool Corporation.

FAQ

YWED94HEXL questions

The breaker trips whenever I start the dryer. Can I keep resetting it?

No. Repeated trips mean something is shorting to ground, such as the element or cord. Leave the dryer off so it can be tested safely.

Is the element the same on the 0, 1 and 2 endings?

Not always. Elements and housings can change between revisions, and a wrong one may not fit the terminals, so the full label number is used to verify.

Call Book a Repair
Call (813) 565-3059 Book a Repair